RAM 4000 Manuel d'instructions télécharger pdf (Page 4)

1). Check polarity of the outlet you wish to use. It is important

that the polarity is checked. If a problem exists with the socket it

can cause serious damage to the machine. This can void your

warranty and create on-going problems with the unit at no fault

to the unit.

2). Do not tie the electrical cord or place it near heat or water.

3). Do not break or pull the electrical cord from the machine or

the socket.

4). Do not use the electrical parts if there is water on them.

5). Do not place water on the electrical parts.

6). Do not operate any switches, internal or external with wet

hands or tools.

7). Turn off the machine and unplug the machine if anything

becomes “abnormal” with the machine or the plug, switches

etc. Contact a technician or AVT Manufacturer as soon as

possible.

8). Do not climb on, shake or slope the machine. It can tip over

and cause serious injury.

9). Do not use flammable substances near or in the machine.

10). Do not use an extension cord.

?The door should be in position after opening:

“Please make sure the limit linkage shaft is fixed in either the

1(Servicing Limit) or 2(Loading Limit) limit position (as shown in the

picture), to avoid the door being closed abruptly and causing

1). Do not touch the active parts in the machine to avoid any

unnecessary injuries.

2). Switch off the electricity source when changing the

fluorescent lamps to avoid shock or fire damage from

occurring.

3). Repairs should be conducted by machine technicians.

4). Check the surge protector at least once a month. Press the

“test” button to confirm if the electricity source turns off.

1 2 3 4 5 6 7 8 9 ... 49 50

Pas de commentaire

RAM 4000 Manuel d'instructions Page 4