RAM 6000 Informations techniques télécharger pdf (Page 128)

Software Manual 128

Automation Tab

The user interfaces will have the ability to:

• Configure/Display local station information such as station name and station number.

• Configure/Display serial ports

• Configure/Display remote stations

• Configure/Display I/O transfers

• Configure/Display MODBUS forward stations

• Configure/Display MODBUS registers allocation

3.6.1 Local Station

• Click on the Local Station sub menu item and the following menu will appear:

Enable Modbus: Select Yes to enable the Modbus option.

Station Name (Required): Enter the name of the local station. The station name must be less than or equal to 32 char-

acters.

Sation Number (Required): Enter the local station number. The station number must be in a range of 1 - 247. The val-

ues may be duplicated for other station as long as the station as long as the station can be uniquely addressed by an IP

address or is connected on a serial port. Note: 0 is a broadcast address. 248-255 are reserved addresses.

Modbus Local Port (Required): Enter a valid port number. The port must be within the range of 1 - 65535 and the rec-

ommended default port is set to 502. Take care to choose a port number not already used by other system services.

Consult Status

Network Socket Statuses TCP Only for a list of ports currently in use. Please note that a Firewall

Allow rule will need to be added for remote access.

• Click SAVE to store the settings for the next reboot, or click APPLY for the settings to take effect immediately.

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 210 211

Pas de commentaire

RAM 6000 Informations techniques Page 128